This article describes how to change the SSL certificate used by your VoipNow 3 or higher HTTP server.
Requirements
Before you start, make sure that the following requirements are met:
- You have the latest VoipNow version (e.g. VoipNow 3 or higher)
- You have access and basic knowledge for using a SSH client (e.g. Putty).
Change the server's SSL certificate
STEP 1: Generate private key and request certificate.
Log in as root using a SSH client, create a certificate request, and send it to your CA authority:
[root@server ~]# openssl req -nodes -newkey rsa:2048 -keyout /root/new.key -out /root/certrequest.csr
This command will generate a 2048-bit key file. Then it will ask basic information about the entity being certified. The Private Key file generated with above command will not have a secret pass-phrase.
When you will receive the message:
"Please enter the following 'extra' attributes to be sent with your certificate request
A challenge password []:"
DO NOT SUBMIT ANY PASSWORD, just press enter.
STEP 2: Save and keep your new key because you will need it later.
Send the certrequest.csr to to your CA authority and they will send back to you a new certificate. After you receive the certificate, copy it on your server in your root directory. Let us assume that the certificate name is newcert.crt.
[root@server ~]# cp /etc/voipnow/certs/http.pem /etc/voipnow/certs/http.pem.backup
VoipNow 3.0.7
If you are still using VoipNow 3.0.x, replace /etc/voipnow/certs/http.pem with /usr/local/voipnow/admin/conf/voipnow.pem
Install the new certificate
The newcert.crt contains the the primary certificate received from the CA authority.
The voipnow.key file contain the private key generated earlier.
If an intermediate certificate was provided by your CA authority, it should be concatenated into the same file as the primary certificate. Let's consider intermediate_cert.crt as the intermediate certificate for our example.
STEP 1: Copy the key to the proper location and rename the key:
[root@server ~]# cat /root/new.key /root/newcert.crt > /etc/voipnow/certs/http.pem
If you have an intermediate certificate, use this command:
[root@server ~]# cat /root/new.key /root/newcert.crt /root/intermediate_cert.crt > /etc/voipnow/certs/http.pem
VoipNow 3.0.7
If you are still using VoipNow 3.0.x, replace /etc/voipnow/certs/http.pem with /usr/local/voipnow/admin/conf/voipnow.pem
STEP 2: Change the permission and the ownership of http.pem:
[root@server ~]# chmod 400 /etc/voipnow/certs/http.pem [root@server ~]# chown httpsa:httpsa /etc/voipnow/certs/http.pem
VoipNow 3.0.7
If you are still using VoipNow 3.0.x, replace /etc/voipnow/certs/http.pem with /usr/local/voipnow/admin/conf/voipnow.pem
Test installation of new certificate
Restart VoipNow HTTP service using:
[root@server ~]# /etc/init.d/voipnow restart
If everything goes well and VoipNow service starts without errors verify if the certificate is installed as should using SSL checker.
Related articles
Except where otherwise noted, content in this space is licensed under a Creative Commons Attribution 4.0 International.