Applies to VoipNow 4.0.0!
This article describes the logs generated by VoipNow components and provides the methods to configure them.
Step-by-step guide
VoipNow web interface
To see what requests are being performed on the web interface, or if you have errors, check the following logs:
/usr/local/voipnow/admin/log/access.log /usr/local/voipnow/admin/log/error.log
Configuration
The configuration file is /usr/local/voipnow/admin/conf/voipnow.conf
To change the debug level, check the following lines:
# Error handling
access_log /usr/local/voipnow/admin/log/access.log main;
error_log /usr/local/voipnow/admin/log/error.log notice;
where error_log can be [debug | info | notice | warn | error | crit | alert | emerg]
PHP
This log is useful in case of web interface issues.
You can find the log file here:
/usr/local/voipnow/admin/log/php_error.log
The loglevel in this file is defined by the level set in table hs_audit_zone (default 3, maximum 7)
Kamailio
The Kamailio log is useful in case you have problems with calls, registration or any other call-related issue, except for audio issues.
You can find the log here:
/var/log/kamailio/kamailio.log
Configuration
The configuration file is in /etc/kamailio/kamailio.cfg
debug=-1 facility_sql=no facility_sipmsg=no facility_hr=no
where debug can have values from -1 to 9.
You can also enable various facilities to add extra information to the logs. For example, facility_sipmsg will include the SIP packets in the log.
All changes here require a Kamailio restart.
For example, the debug level can be set to level 3 example with the following command:
kamctl fifo debug 3
The change immediately becomes active and no restart is required.
Asterisk
The Asterisk log is useful in case of call-related issues. You can find the log files here:
/var/log/asterisk/messages
Or directly in the console, using the following command:
asterisk -rcvvvvvvvvvvvvvv
Configuration
The content of the log file or of the console is configurable in /etc/asterisk/logger.conf:
console => notice,warning,error ; what to log on console (add "fax" to log the fax error messages as well) messages => notice,warning,error ; what to log on messages
Extra flags like moh, fax, sip and rtp are available. Loglevel can be configured from the asterisk cli.
For example, to set debug and verbose to level 1111, run the following command:
asterisk -rx "core set debug 1111" asterisk -rx "core set verbose 1111"
These commands will only take effect with debug and verbose active.
Hubring
You can find the Hubring log here:
/var/log/hubring/hubring.log
It is recommended to troubleshoot service issues - for example, if Hubring does not start.
To see all operations performed with Hubring key, run the following command:
hr-cli -dp <password> -n 10 monitor
where password is the dbkey value from /etc/hubring/hubring.conf)
Database
The log files created by MariaDB are the following:
/var/lib/mysql/<hostname>.err #mainly startup/shutdown messages /var/lib/mysql/<hostname>.log #queries ran in mysql by all applications
To see all queries performed in the database, in the log file, run the following command:
mysql -u`cat /etc/voipnow/.sqldb | awk -F ":" '{print $2}'` -p`cat /etc/voipnow/.sqldb | awk -F ":" '{print $3}'` voipnow -e 'set global general_log=ON;'
To disable the log, run the same command, but use general_log=OFF instead of general_log=ON. This will log all queries performed in MySQL in the /var/lib/mysql/<hostname>.log file.
Postfix
To troubleshoot mailing issues, use the Postfix log file located here:
/var/log/maillog
Related articles
Except where otherwise noted, content in this space is licensed under a Creative Commons Attribution 4.0 International.